OVERVIEW
SPECIFICATIONS
QUOTE/INQUIRY
 
     
 
 
▪ All electric

▪ Horizontal

▪ Compact precision

▪ Tonnage: 15tf (18USton)
 
 
     
     
 
ADVANCED NEW ELJECT
  
All Electric Injection Molding Machine
NEX SERIES
   
NEX15 was developed for high-cycle molding of micro precision parts. It is a compilation of Nissei's various ultimate micro molding technologies: well-designed precision metering and high-cycle molding, high-speed quick-response injection system, and high-precision high-rigidity clamping mechanism. NEX15 demonstrates its supremacy in 0.1~0.3g micro precision parts, such as for digital cameras, mobile phones, hard drives, and fine-pitch connectors.
   
 
 
 
KEY FEATURES
 
   
 
New injection system
...Quick response, high-performance, and high-durability
  • High-speed injection system provided as standard…Injection velocity of 500mm/s, quick response (low inertia motor), and high injection pressure...NEW!
  • Long feed zone screw... Precision metering, plasticization, and high-cycle operation (Optimal design for LCP, PA66, and PPS).
  • Quick-response check valve... Stability of product weight.
  • Special connector nozzles designed exclusively for the specific materials (optional)…It prevents stringiness/drooling of the material and promises stable land separation.
  • Headless barrel ... It is hardly affected by outer disturbance and simplifies the screw maintenance.
  • 5-zone control of nozzle and barrel (Nozzle, front, middle, rear 1, and rear 2).
  • Simultaneous heating of nozzle and barrel ... It prevents the carbonization and deterioration of resin inside the nozzle.
  • Independent temperature control circuit for hopper throat block (PID control).
  • Material deterioration prevention function.
  • High-precision metering control ... "pre-packing" or "precise metering" mode can be selected.
  • Double-pulling nozzle touch.
  • Ultra high-speed control with the injection scanning time of 100 microsec... Drastic improvement in response and repeatability of process and V-P changeover control.
  • High-durability ball screw.
 
 
   
 
Connector nozzle selections
LPC, etc.
Type A
LPC, modified PA, etc.
 Type B
PA, etc.
 Type C
PC, PBT, etc.
 Type D
 
* An optimal nozzle, including the bore and R, can be selected according to the material (grade).  Contact us for more details. 
   
 
New mold clamping mechanism“Flat Clamp”
  
...High-cycle, High-precision, high-rigidity, high-durability, and low-vibration  
  • High-precision/high-rigidity mold clamping mechanism "Flat Clamp" is a mold-friendly toggle system that was developed through a thoroughgoing structural analysis to deliver the ultimate performance.
    > Newly designed center-supported stationary platen.
    > Movable platen that evenly transmits the clamping force.
    >New movable platen slide (automatic grease feed for the slide table and tie bar).
  • "Automatic clamping force adjustment and direct clamping force setting" made linear pressure toggle possible.
  • New high-sensitivity mold protection function.
  • Wide tie-bar (260 x 260 mm)... A 20-ton class mold can be mounted.
  • The sliding section of mold clamping platen with a long-span guide.
  • Low-vibration high-cycle operation with a new 5-point link.
  • Quick response and high-speed ejector.
  • Dual-pull nozzle touch that helps to maintain the parallelism for a long time.
  • High-durability toggle pin and ball screw.
  
   
 
New Controller “TACT” (2nd generation)
 
…100sec (1/10,000 sec.) ultra high-speed control, the fastest in the industry...
  • 12.1-inch color liquid crystal screen
  • Injection scanning speed of 100 microsec.
    ... Excellent performance for smaller-volume micro molding
  • Nozzle and barrel simultaneous heating function
  • New high-sensitivity mold protection function
  • Variety of molding programs provided as standard
    HPC (Injection holding pressure positioning control)
    CPN3 (Clamping compression molding)
    IDMC (Injection during clamping)
    MIP0 (Processing inside mold)
  • Improved quality control function
  • A six-language display system (English, Japanese, Chinese, Spanish, Korean, and Thai) is provided as standard
  • Satisfying programming function
  • Internal memory for molding conditions: up to 300
  • LAN and USB ports are provided as standard
  • Easy access to the quality/production control system “PQ Manager”
  
   
 
New user-friendly design
  • Compact & high-rigidity bed
  • Wide safety door (Wide opening and transparent cover)
  • Improved maintainability... headless barrel, easy injection swing operation, etc...
  • A variety of new high-cycle and low-vibration designs (both hardware and software)
 
Total support for molding, molds, and auxiliary equipment of small-volume products
Many types of auxiliary equipments are available. Contact us for more details.
   
   
©2011 Nissei America, Inc.